Wacker Neuson EZ38 - Page 114

5-18 OM EZ38 us 1.1 * ez38b510.fm
5
3. Swivel the boom to the left as far as it will go.
4. Turn the upper carriage so that the boom is 90° to the travel gear.
5. Position the boom as shown in Fig. 144.
6. Stop the engine, remove the starting key and carry it with you.
7. Raise the control lever base.
8. Wait 1 minute.
9. Put a piece of wood A against the attachment (see figure).
10.Wait 1 minute.
➥ If the attachment does not move from the piece of wood:
➥ Machine is operational.
➥ If the attachment moves away from the piece of wood:
➥ Stop operation immediately.
➥ Contact a Wacker Neuson service center and have the malfunction
rectified.
Fig. 142
Fig. 143
90°
Fig. 144
10 cm (4 in)
Fig. 145
A