S E C U R I N G T H E L O A D ER
129
W L 3 0
9 SECURING THE LOADER
The following instructions apply to stopping and
parking the loader after daily operation, transport-
ing the loader and to all servicing, inspection and
repair work.
• Place the loader on an even, dry surface that can sup-
port sufcient weight.
• Lower the loader lift arms.
• Engage the parking brake and stop the engine.
• Switch off all electrical switches.
• Relieve the pressure in all hydraulic circuits by cycling
the controls after the engine has stopped.
• Secure the loader with the wheel chock.
• Clean dirt off the loader.
• Perform a visual inspection to make sure there are no
leaks:
- in the hydraulic system
- in the cooling system
- in the fuel system
•
Perform a visual inspection for damage to the loader,
especially on the tires, attachments and locking mecha-
nism for the attachments.
•
Fill the fuel reservoir and check the operating level of
the other uid reservoirs after the temperature has been
reduced to a level that is comfortable to touch.
• Secure the loader against unauthorized use:
- Remove the starting key
- Close the windows, doors, reservoir lid and engine en-
closure.
To Next Page
Loading...
Need help?
General
