S E R V I C I N G A N D I N S PE C T I O N
162
10.7.2 Servicing the engine Checking the engine oil level
WARNING
Shearing, pinching, and crushing hazards exist
when the engine is running.
► Do not open the engine enclosure until the en-
gine has stopped.
Burn hazard.
The engine, engine exhaust and cooling system
exceed 93°C (200°F) at operating temperature.
Touching the engine compartment components
can cause severe burns.
► Stop the engine and wait until the engine com-
partment components are cool enough to touch
before performing service work.
The engine lubricating oil dipstick is located on
the left side of the engine facing the direction of
machine travel.
Check the oil level (Fig. 66, location 1) according
to the maintenance schedule and conrm that the
level is between the minimum and maximum marks.
If the level is at or below the minimum level add the
specied oil (Fig. 66, location 2) before operating
the engine.
Do not exceed the maximum engine oil level when
adding lubricating oil to the engine. Excessive oil
levels can cause engine damage.
To Next Page
Loading...
Need help?
General
