S E R V I C I N G A N D I N S PE C T I O N
130
10 SERVICING AND INSPECTION
10.1 Basic safety instructions for servicing and inspection
Operator’s Manual
• Perform servicing and inspection work only if you have
read and understood the Operator’s Manual.
•
Observe the basic safety instructions and all the warning
signs attached to the loader.
•
The Operator’s Manual describes the work to be per-
formed. However, the descriptions of work processes
provide the necessary instructions only for experienced
specialized technicians.
•
Keep the Operator’s Manual with the loader at all times.
Personnel
•
Maintenance and inspection personnel must have spe-
cialized knowledge of servicing and inspection work
on the loader. The specialized knowledge required can
be obtained at training sessions from Wacker Neuson
Service.
•
Perform servicing and inspection work only with suit-
able work clothing and personal protective equipment.
•
Wear hearing protection should there be noise exceed-
ing 90 dbA.