O P E R ATIN G A N D O PE R AT I O N
77
W L 3 0
Fig. 29
Ventilation outlets
Ventilation outlets
You can use the outlets (Fig. 29) to control air ow into cab.
In cold weather, warm air supply keeps the windows free of
ice and heats the cab in the process.
5.2.5 Before starting the engine
Before starting the engine:
•
Make sure that no one is on or near the loader.
• Keep the operating elements clean and dry.
• Remove or tighten all loose objects in the cab.
•
Make sure that the cab windows and exterior
mirrors are clean.
•
While in the operator’s seat, position the exterior
mirrors so that you have a good view of the area
immediately behind the loader.
• Make sure that all safety devices are tted, all
tools have been removed after repairs, and the
hood is closed.
1. Perform the »Before entering the cab« checks prior to
starting the engine (see the chapter »Operation«).
2.
Adjust the operator’s seat and the steering column as
needed.
3. Adjust the rear view mirror / exterior mirror.
4. Put on your seat belt.
To Next Page
Loading...
Need help?
General
