B A S I C S A F E T Y I N S T R U C T I O N S
27
W L 3 0
2.4.3 Electrical power
• Regularly check the loader‘s electrical equipment. De-
fects, such as loose plug connections or cables with
burnt insulation, shall be replaced before resuming op-
eration.
•
If an electrical malfunction is discovered, stop the wheel
loader in a safe location, lower the loader arms and at-
tachment to the ground and stop the engine. Contact
the supervisor for diagnosis and repair by a qualied
technician before resuming operation.
•
Replacement fuses shall be of the same type and capac-
ity as specied by the manufacturer in the Operator’s
and Repair Manuals. Do not attempt to bypass a fused
system to resume operation.
2.4.4 Flying sparks / re danger
WARNING
Fire hazard.
Sparks from the exhaust, or electrical equipment, or
hot machine parts can ignite explosions and res.
►
Do not work in enclosed spaces where am-
mable materials, explosive vapors, or combus-
tible dust are found.
► Stay clear of ammable materials such as hay
and straw.
►
Park the Wheel Loader only in areas free of
ammable materials.
To Next Page
Loading...