B A S I C S A F E T Y I N S T R U C T I O N S
19
W L 3 0
2.2 Selection and qualication of personnel / basic duties
•
Personnel being trained, educated, instructed or partici-
pating in a general training program may only work on
or with the machine under constant supervision of an
experienced, authorized supervisor.
•
Work on the machine‘s electrical equipment may only
be perform by an electrician or by trained persons under
the direction and supervision of an electrician.
• Work on the chassis, brakes and steering system may
only be performed by trained, specialized personnel.
•
Only trained, specialized personnel with specic knowl-
edge of and experience in hydraulics may work on hy-
draulic units.
•
The operator of the wheel loader must be qualied to
operate the machine through demonstration of com-
prehension of the operating instructions. No one shall
operate the wheel loader if impaired due to intoxication
or drug reaction.
•
Diagnosis and repair of the wheel loader shall be per-
formed by trained competent technicians unimpaired by
intoxication or drug reaction.
•
Prohibit unauthorized and untrained people from access
to the starting key and operation of the wheel loader.
•
The wheel loader operator is responsible for visually
monitoring the work area of the wheel loader and pre-
venting anyone from entering the area without permis-
sion. If a person enters the area while the wheel loader
is in operation, the operator shall stop the wheel loader
and instruct the person to leave the work area until the
wheel loader has been stopped in a safe mode. The
person may then approach the machine in full view of
the operator.
To Next Page
Loading...
Need help?
General
