S E R V I C I N G A N D I N S PE C T I O N
154
10.5 General safety check
Check:
•
all steel parts for damaged and loose screws/bolts, par-
ticularly the ROPS structure,
• the condition of the seat belt,
• the quick-change system for the attachments,
•
that all the hinge pins are in the correct position and are
secured by their locking devices,
• that the step and handles are in good condition, clean
and t well,
• cab windows for cracks and fractures,
•
the condition of the reectors and the lighting, including
the work lights,
• the tires for damage and any sharp-edged objects that
have penetrated them,
• the condition of all warning and message labels.
Immediately rectify any damage detected during the
safety check. Damaged parts must be immediately
repaired or replaced. Do not use the loader again
until the damage has been rectied professionally.
To Next Page
Loading...
Need help?
General
