S E R V I C I N G A N D I N S PE C T I O N
153
W L 3 0
ENVIRONMENTAL NOTE
Avoid environmental damage.
Clean the loader only in a suitable place where the
waste water can be collected in an ecologically
sound manner.
Collect contaminated waste water and dispose of
it in an ecologically sound manner.
When the loader is new (in the rst three months),
only clean it with a sponge.
As the paintwork on the underside is not fully hard-
ened, the paintwork can be damaged if cleaned
with a high-pressure cleaner.
Please note when cleaning the loader with a high-
pressure cleaner:
Maximum water pressure 130 bar (1885 psi).
Maximum water temperature 80°C (176°F).
When cleaning, do not hold the jets of the high-
pressure cleaner too close to the labels and other
sensitive parts, so that nothing gets damaged.