B A S I C S A F E T Y I N S T R U C T I O N S
30
2.5 Transporting and towing / restarting
• Instructions are provided in this Operator’s Manual for
towing, loading and transporting the wheel loader safely
without machine damage.
•
The towing machine shall be capable of towing the wheel
loader.
•
The loading and transport equipment shall be appropri-
ate to safely complete the sequence of operation. If the
wheel loader is to be lifted by a crane device, consult
the machine specications to select the correct crane
capacity and OSHA lifting devices to safely complete
the lifting operation.
•
Only restart the loader according to the Operator’s
Manual.
•
See Chapter 6 for complete transporting and towing
instructions.
2.6 Final decommissioning / dismantling
•
Drain and dispose of all uids in suitable containers and
dispose of the uids in an environmentally responsible
manner. Do not dispose in sewers, streams, lakes or
on the ground.
• Remove the battery and dispose of it at an authorized
recycling center. Remove the starting motor to disable
the engine.
•
Dismantle and recycle the components according to the
material instructions on the individual parts. Tires and
rubber based parts can be recycled separately.
To Next Page
Loading...
Need help?
General
