S E R V I C I N G A N D I N S PE C T I O N
156
10.7 Maintenance and inspection work 10.7.1 Preparation for maintenance and inspection work
Opening the engine enclosurePerform maintenance and inspection work only if
the loader is secured as described in Section 9,
page 129 »Securing the loader«.
The operator cab/platform can be tilted for access
to the wheel loader systems for inspection, main-
tenance and repair. Refer to section 10.7.1 pages
158-161 for detailed instructions on how to tilt the
operator cab/platform.
WARNING
Crushing/shearing hazard.
Moving engine parts can crush and cut.
►
Do not open the engine enclosure unless the
engine is stopped to avoid hazards from moving
objects (cooling fan and drive belts for the fan
and alternator).
WARNING
Burn hazard.
Engine components can get very hot during op-
eration.
►
Do not touch the engine mass, exhaust system,
or cooling system immediately after stopping
the engine.
►
Wait until the stopped engine has cooled to the
point that the exhaust system, engine mass and
cooling system are comfortable to touch.