O P E R ATIN G A N D O PE R AT I O N
64
5.1.3 Doors and windows
The cab has one door on the left and one on the right.
The cab doors can be locked in two positions:
1. Closed
2. Open (Fig. 18)
The cab door can be locked in »Open« position by releasing
the lever (Fig. 19).
Always check that the cab doors and windows are closed
before leaving the loader.
Fig. 18
Cab door locking
Fig. 19
Releasing locked
cab doors
CAUTION
Possibility of injury or equipment damage from un-
latched cab doors.
►
Close and latch the cab doors during operation.
►
The cab doors may be latched open during op-
eration if circumstances require.
►
Always latch both doors before operating the
wheel loader in the open or closed position.
To Next Page
Loading...