O P E R ATIN G A N D O PE R AT I O N
63
W L 3 0
Check:
• Engine oil level
• Hydraulic uid level
• Coolant level
• Fuel level
•
Check the condition of the tires, looking for abrasion,
cuts or wear. Check the tire pressure! Ensure that the
tires are inated to the proper pressure (see tire pres-
sure table).
•
Ensure that the engine enclosures and the caps for the
fuel reservoir and hydraulic uid reservoir are present
and have been tightened.
Operator station access
WARNING
Slipping hazard.
► Check that the handles and steps are in good
condition and clean before entering and exiting
the wheel loader control station..
► Use the attached handles and steps.
► Always get in and out with your face turned to-
ward the loader.
To Next Page
Loading...