Wacker Neuson WL 30

S E R V I C I N G A N D I N S PE C T I O N
165
W L 3 0
Fig. 67
Engine oil drain
opening
2
1
1. Bring the engine to operating temperature and allow to
cool until the drain plug is comfortable to touch.
2.
Stop the loader on a horizontal surface and set the park-
ing brake.
3. Lower the loader lift arm and attachment to the ground
or working surface.
4. Stop the engine.
5.
Place a container with sufcient volume to avoid spillage
under the drain opening.
6.
Remove the sealing plug Item 1 and attach the sup-
plied hose Item 2 (Fig. 67). The oil will now ow out of
the engine.