S E R V I C I N G A N D I N S PE C T I O N
195
W L 3 0
10.7.8 Servicing the cab vent lter
The loader is equipped with a dry air lter for ltering the
engine intake air for cab ventilation. The lter is located
on the front of the cab above the middle joint of the loader
(Fig. 91).
1. Remove the lid of the lter housing.
2. Remove the lter.
3. Insert a new lter.
4. Replace the lid of the lter housing.
Change the cab air lter annually, or more frequent-
ly under dusty conditions.
Fig. 91
Cab vent filter
To Next Page
Loading...