O P E R ATIN G A N D O PE R AT I O N
68
Buckling the seat belt
1.
Sit back in the operator seat, so that your entire back is
touching the seat.
2. Place the seat belt over your lap.
3. Seat belt must not be twisted.
4.
Insert the seat belt tab Item 1 into the opening in belt
buckle Item 3 until it clicks.
5.
If necessary, adjust the seat belt to your body size. See
section »Adjusting the seat belt« (page 69).
Releasing the seat belt
1. Press the red button Item 2 on the belt buckle.
1
2
3
Fig. 22
Buckling the seat
belt
To Next Page
Loading...