O P E R ATIN G A N D O PE R AT I O N
66
Fig. 21
Adjusting the opera-
tor’s seat
3
2
4
1
2a
5.1.5 Adjusting the operator’s seat
1. Height adjustment:
There are three levels of height adjustment. Adjust the
height while sitting in the seat by turning the height ad-
justment handle. In each case the position set is the one
indicated on the bottom of the handle. Re-adjust the weight
setting after each height adjustment.
WARNING
Personal injury or property damage hazard.
Adjusting the operator seat while the wheel loader
is in operation can cause inadvertent control move-
ments.
►
Do not adjust the operator seat while the wheel
loader is in operation.
►
Stop the machine rst and then adjust the seat.
You can adjust the operator’s seat to t your height and
posture. This keeps your muscles relaxed and prevents
you from tiring while working.
Adjust the seat so that you can comfortably reach the levers
and pedals with your back against the backrest.
You can adjust the seat in the following ways (Fig. 21):