O P E R ATIN G A N D O PE R AT I O N
91
W L 3 0
Fig. 33
Operating lever for
the optional hydrau-
lics
Z
R
L
Detent mechanism for the optional hydraulics
This function allows you to operate the optional hydraulic
connections in continuous use. This function is necessary
for certain attachments powered by a hydraulic motor that
necessitates continuous use (e.g. broom). Then you do not
have to constantly hold the control lever for the optional
hydraulics.
• Move the control lever for the optional hydraulics to the
left (L), past normal operation.
–
The lever will be locked, providing continuous hydraulic
pressure and ow.
(Float position
)
• Move the control lever for the optional hydraulics to the
right (R), past normal operation.
–
The lever will lock, relieving the optional hydraulic system
pressure for safe installation or removal of hydraulic
attachment hoses.
Fig. 34
Hydraulic connec-
tions
R L