S E R V I C I N G A N D I N S PE C T I O N
211
W L 3 0
Before jump-starting, check if the loader‘s dead battery is
functional:
1. Switch off all the loader‘s electrical controls.
2.
Switch the starting key to position 1 (operation). The
warning lights must light up now!
3.
If the warning lights do not light up, the battery is defec-
tive. In that case, the loader must not be started! Install
a new replacement battery.
Fig. 99
Connecting the
jumper cables
12
3 4
r
s
V L
V L
To Next Page
Loading...
