S A F E T Y I NS T R U C TI O N S F O R R EPA I R S
222
Do not remove seals or sealing wax:
• Changing rated pressures for relief valves is prohibited
without the express consent of Wacker Neuson.
•
Do not damage or remove seals and sealing wax on the
engine, the pressure limiting valves and accumulators.
•
If an area is repainted and a safety label is damaged or
obliterated, replace the label before using the machine.
If a removed component or assembly had a safety mes-
sage label, replace the label with the replacement part.
Your Wacker Neuson dealer can help you to get replace-
ment labels for your machine
After completing the repair:
•
Put protective paint on all uncoated machine parts to
prevent corrosion damage.
•
Install the cab mounting screws again after the repair
work has been completed.
• Reattach all safety devices, covers and noise/vibration
insulation after repair work has been completed.
•
Check the functioning of the loader, in particular the
parts repaired in trial operation. Make sure that no one
is in the loader‘s danger area.
•
Do not approve the loader for operation until all the
loader‘s areas function properly.
To Next Page
Loading...
Need help?
General
