Wacker Neuson WL 30 User Manual

O P E R ATIN G A N D O PE R AT I O N
75
W L 3 0
The rotating beacon
If you want to use a rotating beacon, mount it on the fastener
provided (Fig. 5).
The switch for operating the rotating beacon is located in
the cab above the operator’s seat (Fig. 27).
• Put the rocker switch Item 8 in position 1:
– The rotating beacon switches on.
• Put the rocker switch Item 8 in position 0:
– The rotating beacon switches off.
(optional equipment)
Front headlights:
• Put the rocker switch Item 6 in position 1:
– The headlights switch on.
• Put the rocker switch Item 6 in position 0:
– The headlights switch off.
Rear headlights:
Operate the taillights using the rocker switch Item 7
(Fig. 27) the same way you would the front head-
lights.
Use the yellow rotating beacon according to local
regulations.

Wacker Neuson WL 30 Specifications

General

Brand	Wacker Neuson
Model	WL 30
Category	Front End Loaders
Language	English