Scanning spectra 3-55
Zero and sample scan screens
When you select a sample scan after performing a zero-scan, the detector
displays one additional screen, labeled 2 of 2. Note that you cannot change the
starting parameter value, ending wavelength parameter value, or the pace
parameter value.
Zero-scan (screen 1 of 4) Sample scan (screen 1 of 4)
(screens 2, 3, and 4 not shown)
Zero-scan
Zero-scan
Zero-scan (screen 4 of 4)
(screen 3 of 4)
(screen 2 of 4)
To Next Page
Loading...
