WIESHEU IS 600 E - Program Step Management; Inserting and Copying Program Steps

Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E
Page 24
Save changes?
No
New baking
New steaming
Yes
Programming
?
Program 1
Pretzel.BMP
01 Preh 200°C
02 Steam 180°C
03 Bake 180°C
Edit
2017-01-11
15:32:15
Edit
new
Copy
Move
Delete
Delete entry
Programming
Edit
new
Copy
Move
Delete
Programming
D
Program 1
Pretzel.BMP
01 Preh 200°C
02 Steam 180°C
03 Bake 180°C
Edit
2017-01-11
15:32:15
E
Program 1
Pretzel.BMP
01 Preh 200°C
02 Steam 180°C
03 Bake 180°C
Edit
2017-01-11
15:32:15
Edit
new
Copy
Move
Delete
Delete entry
Programming
Edit
new
Copy
Move
Delete
Programming
F
Insert a new program step within a baking program.
You are in the “Program” menu item
Submenu “Edit”.
■ Choose the position where you would like to insert the new
baking step.
■ Use the slider / rotary button to select the “New” menu item (D).
■ Select the program step you would like to insert:
● New baking
● New steaming
■ If necessary, edit the program step as outlined in the chapter entitled:
“Edit program step”.
■ Press the “C” button.
→ The system shows the following message on the display:
“Save changes? Yes / No”.
■ Select “Yes”:
→ The program step is inserted and saved.
or
■ Select “No”:
→ The process is cancelled.
Copy an existing program step within a baking program.
You are in the “Program” menu item
Submenu “Edit”.
■ Use the slider to choose the baking step (E) that you want to copy.
■ Use the slider/rotary button to select the “Copy” menu (F).
■ Use the slider/rotary button to choose the location where you want the
copied baking step to be inserted.
■ Select the new program step.
■ Edit the program step as described in the chapter entitled.
“Edit program step”.
■ Press the “C” button.
→ The system shows the following message on the display:
“Save changes? Yes / No”.
10.1.5 Inserting a new program step
10.1.6 Copying a program step