WIESHEU IS 600 E - Last Messages; Operating Parameters; Factory Settings

Page 59
Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01
2017-01-11
15:32:15
0 ml water0stmg()
0 ml water1clng.()
12345678°CMaxToard()
2*Valve0Steam()
0*Valve1Cleang()
0*Pump0()
0*Pump1()
Operating parameters
Conrmed 10:VFD Communication
interrupt.
2017-01-11
15:32:15
Current conditions
Reset device
data?
No
Yes
?
Are you sure?
No
Yes
?
2017-01-11
15:32:15
Communication
Energy saving
Operating parameters
Current conditions
Factory settings
Appliance settings
13.4 Last messages
The list shows various operating data. This menu item is used as infor-
mation for service purposes.
The list displays error messages.
This menu item is used as information for service purposes.
You can view detailed information about the error message.
Reset all the settings to the factory defaults if necessary. All settings
made individually will be lost irretrievably.
You are in the “Appliance settings” menu.
■ Use the slider / rotary button to select the “Factory settings” sub-
menu.
→ The display shows the message:
“Reset device data? Yes / No”
■ Select “Yes”:
→ The display shows the message:
“Are you sure? Yes / No”
■ Select “Yes”:
→ All the data will be reset to factory settings.
Or
■ Select “No”:
→ The process is cancelled.
13.6 Factory settings
13.5 Operating parameters