WIESHEU IS 600 E - End NB (Baking Off); Enter Standby

Page 53
Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01
2017-01-11
15:32:15
Energy saving
End PH
End NB
Enter standby
Switch off display
Standby light
Oven light on
Cleaning light
15 min
Enter time
Always on
Enter time
Save changes?
No
Yes
?
2017-01-11
15:32:15
End PH
End NB
Enter standby
Switch off display
Standby light
Oven light on
Cleaning light
Energy saving
15 min
Enter time
Always on
Enter time
Save changes?
No
Yes
?
Limit the “Baking off” display message to a dened period.
You are in the “Energy saving” menu.
■ Use the slider/rotary button to select the “End NB” submenu.
■ Choose from the following settings:
● “Always on”
→ The system keeps displaying the “Baking off” message until you
choose “No” (see the chapter entitled “Baking off”)
● “Time setting” (1-29 minutes)
→ The display message “Baking off?” goes out automatically if bak-
ing off is not started after the set time.
→ The display shows the message:
“Save changes? Yes / No”.
■ Select “Yes”:
→ The setting is saved.
or
■ Select “No”:
→ The process is cancelled.
Dene and set a time after which the appliance automatically switches
from the work menu to standby mode if the unit is not used.
You are in the “Energy saving” menu.
■ Use the slider/rotary button to select the “Enter standby” submenu.
■ Choose from the following settings:
● “Always on”:
→ The appliance stays switched on continuously.
● “Time setting” (1-29 minutes):
→ The appliance switches to standby mode after the specied time.
→ The display shows the message:
“Save changes? Yes / No”.
Select “Yes”:
→ The setting is saved.
or
■ Select “No”:
→ The process is cancelled.
13.3.2 End NB (baking off)
13.3.3 Enter standby