WIESHEU IS 600 E - Sound Table

Page 39
Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01
Button sound
Preheating sound
Completed sound
Info sound
Error sound
2017-01-11
15:32:15
Sound table
BEEP.WAV
CLICK.WAV
ELECTRIC.WAV
Signal le
Save changes?
No
Yes
?
Button sound
Preheating sound
Completed sound
Info sound
Error sound
2017-01-11
15:32:15
Sound table
Save changes?
No
Yes
?
Transfer your own sounds to the controller.
The sound le may have a maximum size of 100 kb (button sound, info sound, error
sound) and a maximum size of 500 kb (preheating sound, completed sound). The le
type must be a *.WAV le. For information about installing sound les, read the chapter
entitled “Appliance settings” - “Communication”.
Assign a sound or tone from the data store.
You are in the “Sound” menu.
■ Use the slider/rotary button to choose the “Sound table” menu item.
→ The different actions to which you may assign a sound are dis-
played:
● Button sound
● Preheating sound
● Completed sound
● Info sound
● Error sound
■ Choose the desired action.
→ A list of the saved sounds is displayed:
● BEEP.WAV
● CLICK.WAV
● ELECTRIC.WAV
■ Choose the desired sound file.
→ The selected sound is played.
■ Press the “C” button.
→ The display shows the message:
“Save changes? Yes / No”
■ Select “Yes”:
→ The setting is saved.
or
■ Select “No”:
→ The process is cancelled.
→ The display shows the message:
“Save changes? Yes / No”
■ Select “Yes”:
→ The setting is saved.
or
■ Select “No”:
→ The process is cancelled.
12.2.4 Sound table