WIESHEU IS 600 E - Energy Saving Features

Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E
Page 52
2017-01-11
15:32:15
Communication
Energy saving
Current conditions
Operating parameters
Factory settings
Appliance settings
15 min
Enter time
Always on
Enter time
2017-01-11
15:32:15
End PH
End NB
Enter standby
Switch off display
Standby light
Oven light on
Cleaning light
Energy saving
Save changes?
No
Yes
?
Set your appliance individually and energy-saving. This offers optimal
use of the energy applied.
You are in the “Appliance settings” menu.
■ Use the slider/rotary button to select the “Energy saving” submenu.
Additional submenu items are displayed in the “Energy saving” menu
item:
● End PH
● End NB
● Enter standby
● Switch off display
● Standby light
● Oven light on
● Cleaning light
● Light always off
● Cooling
● Auto-shut-off
Automatically end preheating after a set time if no other input is made.
Pre-heating ends and the control switches to “Work” mode.
You are in the “Energy saving” menu.
■ Use the slider/rotary button to select the “End PH” submenu.
■ Choose from the following settings:
● “Always on”
→ The pre-heating temperature is kept constant.
● “Time setting” (1-29 minutes)
→ Pre-heating is ended automatically if the baking program is not
started after a specied time.
→ The display shows the message:
“Save changes? Yes / No”
■ Select “Yes”:
→ The setting is saved.
or
■ Select “No”:
→ The process is cancelled.
13.3 Energy saving
13.3.1 End PH (preheating)