WIESHEU IS 600 E - Light; Blinken bei Vorheizen Ende; Blinken bei Backzeit Ende

Page 35
Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01
12.1 Light
Assign a visual signal to a specic event.
You are in the ”Operator settings” menu.
■ Use the slider/rotary button to select the ”Light” submenu.
■ You can make one setting in each case for the following events:
● Flashing on PH (PH = preheating)
→ Light signal when preheating temperature is reached.
● Flashing on BE (BE = German abbreviation for end of baking
time)
→ Light signal when preheating temperature is reached.
● Flashing on RE (RE = German abbreviation for end of cleaning)
→ Light signal at the end of the cleaning program.
12.1.1 Flashing at end of preheating
12.1.1 Flashing at end of baking time
■ ”ON” setting.
→ The light signal is activated.
→ At the end of the ”Preheating” program step, the oven lighting
ashes.
or
■ ”OFF” setting.
→ The light signal is deactivated.
→ At the end of the program step, no light signal is issued.
■ Choose your setting.
→ The display shows the message:
”Save changes? Yes / No”
■ Select ”Yes”:
→ The setting is saved.
or
■ Select ”No”:
→ The process is cancelled.
■ ”ON” setting.
→ The light signal is activated.
→ At the end of the baking program, the oven lighting ashes.
or
■ ”OFF” setting.
→ The light signal is deactivated.
→ At the end of the baking program, no light signal is issued.
■ Choose your setting.
→ The display shows the message:
”Save changes? Yes / No”
■ Select ”Yes”:
→ The setting is saved.
or
■ Select ”No”:
→ The process is cancelled.
14/08/2017
14/08/2017
15:32:15
15:32:15
ashing on PH
ashing on BE
Light
Light
On
On
Switch on/off
Switch on/off
Save changes?
No
Save changes?
No
Yes
Yes
?
?
14/08/2017
15:32:15
ashing on PH
ashing on BE
fashing on RE
Light