Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E
Page 64
DANGER
Danger of injury!
Operating or using the appliance incorrectly can cause serious injuries.
● Everybody who works with the appliance must have read the user informa-
tion before operating it.
There is a risk of injury if you carry out work on the appliance incorrectly.
● To avoid serious injuries, only WIESHEU GmbH service engineers are
allowed to carry out maintenance, service and repair work.
● Get in touch with the WIESHEU service engineers in your region.
No. Error message Cause Remedy
1
Motor temperature too high,
motor switched off
Sensor in motor has tripped, no
further operation possible
Disconnect the appliance
from the mains, notify
WIESHEU SIC*
2
Hardware short circuit detection
has switched off motor
Sensor in frequency converter
has tripped, no operation possi-
ble
Disconnect the appliance
from the mains, notify
WIESHEU SIC*
3
Overcurrent detection has
switched the motor off
Sensor in frequency converter
has tripped, no operation possi-
ble
Disconnect the appliance
from the mains, notify
WIESHEU SIC*
4
Temperature of the motor control
too high
Sensor in frequency converter
has tripped, no operation possi-
ble
Disconnect the appliance
from the mains, notify
WIESHEU SIC*
9 CAN communication interrupted
Connection within the appliance
disturbed, no operation possible
Disconnect the appliance
from the mains, notify
WIESHEU SIC*
10 VFD communication interrupted
Connection to the frequency
converter disturbed, no operation
possible
Disconnect the appliance
from the mains, notify
WIESHEU SIC*
20 VFD not ready for operation
Frequency converter not opera-
tional, no operation possible
Disconnect the appliance
from the mains, notify
WIESHEU SIC*
30
VFD supply interrupted, no
3-phase power feed
Fuse has tripped or phase miss-
ing, fault in power supply of the
appliance
Disconnect the appliance
from the mains, notify
WIESHEU SIC*
31 Fuse F1 defective
Fuse in frequency converter has
tripped, no operation possible
Disconnect the appliance
from the mains, notify
WIESHEU SIC*
32 Fuse F2 defective
33 Fuse F3 defective
34 Fuse F4 defective
35 Fuse F5 defective
17 Error Messages
*WIESHEU Service Information Center Phone: +49 7148 1629-400
To Next Page
Loading...