WIESHEU IS 600 E - Deleting a Program; Deleting an Entry

Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E
Page 28
Manual baking
Pretzel
Bread rolls
Baguettes
Pretzel rolls
Pretzel
Croissants
Programming
2017-01-11
15:32:15
Edit
new
Copy
Move
Delete
Programming
Programming
N
Save changes?
No
Yes
?
Save changes?
No
Yes
?
Manual baking
Pretzel
Bread rolls
Baguettes
Pretzel rolls
Pretzel
Croissants
Programming
2017-01-11
15:32:15
Copy
Move
Delete
Delete entry
Add program.
Programming
Programming
O
Delete a program from the data store.
You are in the “Program” menu item.
■ Use the slider/rotary button to choose the program (A) that you want
to delete.
■ Choose the “Delete” menu item (N).
→ The system shows the following message on the display:
“Remove entry? Yes / No”
■ Select “Yes”:
→ The setting is saved.
or
■ Select “No”:
→ The process is cancelled.
A deleted program is removed from the data store. After deleting the program, it is no
longer available. You cannot undo deletion.
When you delete the entry, the program is removed from the program list. The program
is not deleted from memory; the program is still available in the memory.
Retrieve the program again to the program list (display) via the “Add program” menu.
Remove a program from the program list (display).
You are in the “Program” menu item.
■ Use the slider/rotary button to choose the program that you want to
remove.
■ Choose the “Delete entry” menu item (O).
The system shows the following message on the display:
“Remove entry? Yes / No”
■ Select “Yes”:
→ The program is removed from the program list (display).
→ The program is still in the controller's data store.
■ Select “No”:
→ The process is cancelled.
10.5 Deleting a program
10.6 Deleting an entry