WIESHEU IS 600 E - Page 70

Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E
Page 66
No. Error message Cause Remedy
_ Error while loading le Wrong le format, wrong
le size
Check/change le format and
size
_ Error while loading the pictures Wrong le format, wrong
le size
Check/change le format and
size
_ Error while loading the logo Wrong le format, wrong
le size
Check/change le format and
size
_ Error while loading the sounds Wrong le format, wrong
le size
Check/change le format and
size
_ Cannot write MB No saving function possible.
Error in memory.
Notify WIESHEU SIC*
_ No editing possible Parameter cannot be changed in
this step
___
_ Login failed! Wrong PIN input Use correct PIN
_ Low water pressure! Is the water
tap open?
No water with steaming or clean-
ing
Check water tap, check
strainer, inquire of water
pressure at water utility
_ Major exceptional error Error from error list, no operation
possible
Notify WIESHEU SIC*
_ Major error! Program cannot be
started
Error from error list, no operation
possible
Notify WIESHEU SIC*
_ Major error! Cleaning could not
be carried out
Error from error list, no operation
possible
Notify WIESHEU SIC*
_ Memory error language le Wrong le format, wrong le size Check/change le format and
size
_ Invalid sound Wrong le format, wrong le size Check/change le format and
size
_ USB error USB medium not recognised Check, use different USB
medium
_ Auto switch off active - no input
is possible!
Auto switch off activated Set Auto switch off to inac-
tive. See the chapter entitled
”Energy saving,
Auto switch off”
*WIESHEU Service Information Center Phone: +49 7148 1629-400