Xerox 8850 Service Manual

03/2003
6-46
8850/ 510DP
Product Specifications
General Procedures
Electrical Specifications
The Printers operate within the following specifications in their respective markets. The Dia-
mondback Printer is not sensitive to the AC power service frequency.
Power Cord Length: 10 feet (3.0 m)
Environmental Conditions
Temperature:
Maximum 80°F (27°C)
Minimum 60°F (10°C)
Humidity:
Maximum 80%
Minimum 20%
Maximum Elevation:
10,000 feet (3048 m)
Roll Size Width: 11” (279.4 mm) 36” (914.4 mm)
Roll Size Diameter: 3” (76.2 mm) to 6.7” (170.2 mm)
Output Print Specifications:
Cut Sheet Minimum Size - 8.5 X 11” (216 X 279 mm) Portrait)
Roll Sheet Minimum Size - 11” X 8.5” (279 X 216 mm) Landscape
Maximum Size 36” X 48 feet (914 mm X 12.2 m)
80 feet (24.4 m) Optional
Table 2
Market Area Current Rating
US/Canada 115 V, 20 Amps (510dp 5 and 7 D-size cpm
only)
208-240V, 20 Amps
208-240V, 15 Amps
EO - Common Market 220-240V, 16 Amps
United Kingdom 220-240V, 13 Amps
Switzerland 220V, 10 Amps
Central/South America 220-240V, 20 Amps
Table 3
Power Consumption of 220V, 20A. Service:
8850 510dp
Rest 60 Watts 110 Watts
Standby 1000 Watts 1000 Watts
Warm-up 3872 Watts 3900 Watts
Running 2100 Watts 2200 Watts
Table 4
Heat Emission (BTU/Hr):
8850 510dp
Standby 4,000 3500
Running 7,200 7600
Table 5
Media Specifications
Bond 20 Lb.
Vellum 20 Lb.
Film 4 mil
Tracing 4 mil

Xerox 8850 Specifications

General

Brand	Xerox
Model	8850
Category	Printer
Language	English