Troubleshooting
Xerox
®
AltaLink
®
C80XX Series Multifunction Printer 295
User Guide
5. Check inside the finisher for any loose staples and remove them.
6. Pull the staple cartridge clamp firmly in the direction shown to open it.
7. R
emove the jammed staples by pulling them in the direction shown.
WA
RNING: The points of the jammed staples are sharp. Remove the jammed staples
carefully.
8. P
ush the clamp in the direction shown until it snaps into the locked position.
To Next Page
Loading...
