Troubleshooting
302 Xerox
®
AltaLink
®
C80XX Series Multifunction Printer
User Guide
8. Remove the jammed staples, then push the clamp in the direction shown until it snaps into the
locked position.
9. Return the staple cartridge to the booklet maker, then return the booklet maker to its original
position.
Clearing Hole Punch Jams
Clearing Hole Punch Jams in Office Finisher LX
If the printer stops printing and reports a hole-punch jam, empty the hole-punch waste container.
For details, refer to Emptying the Hole Punch Waste Container on page 234.
After emptying the hole-punch waste container, locate and remove any paper jams.
To Next Page
Loading...
Need help?
General
