Getting Started
36 Xerox
®
AltaLink
®
C80XX Series Multifunction Printer
User Guide
4. Slide down the top of the spacer plate to engage the peg on the back of the tray into the matching
hole in the spacer plate.
5. Install the screw to secure the spacer plate.
6. Repeat these steps to adjust the spacer plate at the front of Tray 6.
7. On the top of the side gate, locate the pin.
8. Lift the pin, then guide it into the desired paper size in the slot.
9. To lock the side gate into place, release the pin.
To Next Page
Loading...
