3-78 Phaser 6130 Color Laser Printer Service Manual
Error Messages and Codes
Other Errors
Invalid Job
Error occurs when the configuration of the printer does not match the printer
driver.
Applicable Chain Link
■ 016-799: Invalid Job (Job Environment Violation)
Initial Actions
■ Cycle printer power.
■ If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ Image Processor Board, PL8.1.9
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Check the paper size. Does the paper
meet the specifications?
Go to step 2. Replace the
paper.
2 Check the paper size setup on the
Control Panel: Menu > Tray Settings >
Paper Size.
Go to step 4. Go to step 3.
3 Set the paper size in the Control Panel
to match the paper in the tray. Does
the error still occur?
Replace the
Image
Processor Board
(page 8-60).
Complete.
4 Does the error still occur? Replace the
Image
Processor Board
(page 8-60).
Complete.
To Next Page
Loading...
