Xerox PHASER 6130 - Unfused Image

Phaser 6130 Color Laser Printer Service Manual 5-57
Print-Quality Troubleshooting
Unfused Image
The toner image is not completely fused to the paper. The image easily rubs
off.
Initial Actions
■ Check the paper transfer path.
■ Ensure there are no debris on the transfer path.
W
arn
i
ng
To prevent burns, allow the Fuser to cool down before starting the
procedure.
Troubleshooting Reference Table
Applicable Notes Example Print
■ Fuser (PL6.1.1)
■ MCU Board (PL8.2.13)
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Check the paper being used and its
condition.
Is the paper dry and recommended
paper?
Go to step 3. Replace with
dry, approved
paper, then go to
step 2.
2 Is the image printed correctly? Complete Go to step 3.
ABCDE abcde 12345
s6180-330