5-58 Phaser 6130 Color Laser Printer Service Manual
Print-Quality Troubleshooting
3 Check the Toner Type
Is non-Xerox Toner in use?
Replace the
toner with the
Xerox toner,
then go to step
4.
Go to step 5.
4 Is the image printed correctly? Complete Go to step 5.
5 Reseat the Fuser.
Warning: Start the operation after the
Fuser has cooled down.
Is the image printed correctly?
Complete Go to step 6.
6 Replace the Fuser (page 8-9).
Warning: Start the operation after the
Fuser has cooled down.
Does the error still occur when
printing?
Replace the
MCU Board
(page 8-59).
Complete
Troubleshooting Procedure Table (continued)
Step Actions and Questions Yes No
To Next Page
Loading...
