Xerox PHASER 6130 - Toner Remaining Amount; Maintenance Function

Phaser 6130 Color Laser Printer Service Manual 23
General Information
Toner Remaining Amount
The CentreWare Internet Services (IS) and PrintingScout (SimpleMonitor)
allow the printer to display toner remaining amount.
Maintenance Function
Firmware Update
The Image Processor Board and Multi-Protocol Network Card firmware can
be updated by customers and service technicians using a Windows PC or
Macintosh with dedicated utilities. Firmware updates are available at
www.xerox.com/office/6130support.
Detailed procedures are available in “Firmware Update” on page A-3.
N
o
t
e
Boot Code can be updated via USB port only.
Toner Cartridge Control Panel Display
Toner
Cartridge Control Panel Display Functionality
Normal Status
Life
Warning
Error
End of
Life Error
Xerox Xerox (TM)
Toner Cartridge
Replace
Soon
Replace
Toner
Cartridge
Prints with full
functionality.
Xerox (refill
Toner
Cartridge)
Xerox (TM)
Toner Cartridge
Replace
Soon
Empty Prints with full
functionality up to 40%
of the Toner Cartridge
life.
Other OEM
(non-Xerox
printer
manufacturer)
Non-Xerox
Toner Cartridge
Printer displays error
and will not print.
Non-Xerox
Toner Cartridge
Manufacturer
Non-Xerox
Toner Cartridge
No Life
Tracking
Replace
Toner
Cartridge
Prints with full
functionality.
Updated Firmware Windows
Via USB/IEEE1284 Via Network (port 9100)
Image Processor Board Available Available
Multi Protocol Network Card Available Available
MCU Board
a
a. MCU Board cannot be updated when ROM starts to be used for MCU Board.
Available Available