Phaser 6130 Color Laser Printer Service Manual 8-21
Service Parts Disassembly
Paper Feeder
Drive Clutch Kit
(PL3.1.99)
1. Remove the Left Side Cover (page 8-17).
2. Release the Drive Clutch harness from the cable restraint on the Feed
Drive Assembly.
3. Unplug the Drive Clutch connector, P/J262. Allow the relay connector to
remain with the printer side of the harness.
4. Remove the E-ring that secures the Drive Clutch on the shaft, using a
miniature screwdriver, and remove the Drive Clutch.
5. Release the two hooks of the Registration Bearing, and remove the
Registration Bearing from the shaft.
P/J262
P/J262
To Next Page
Loading...
