1-2 Phaser 6130 Color Laser Printer Service Manual
General Information
Printer Introduction and Overview
The Xerox Phaser 6130 Color Laser Printer has a single-pass color laser-
design architecture, which offers color and mono print speed at 12/16-ppm,
and resolutions up to 600 x 600 dots-per-inch (dpi). The printer supports
Adobe PostScript 3 and PCL6, USB 2.0, and 10/100 Base-TX Ethernet.
The Phaser 6130 printer provides a standard 250-Sheet Paper Tray, and a
single-sheet Manual Feed Slot. Both the Paper Tray and the Manual Feed Slot
support specialty media, card stock, and envelopes. The Output Tray holds
150 sheets facedown.
The printer options add memory and functionality. Memory upgrades are
available from Xerox to increase the standard RAM from 128 up to 512 MB
(the printer will support up to 1152 MB maximum). The Multi-Protocol Network
Card expands the supported network protocols.
Technical Support Information
The Xerox Phaser 6130 Color Laser Printer Service Manual is the primary
document used for repairing, maintaining, and troubleshooting the printer.
To ensure complete understanding of this product, participation in Xerox
Phaser 6130 Service Training is strongly recommended. To service this
product, Xerox certification for this product is required.
For updates to the Service Manual, Service Bulletins, knowledge base, etc.,
go to:
■ Xerox Global Service Net - https://www.xrxgsn.com/secure/main.pl
■ Service Partners: http://www.office.xerox.com/partners
For further technical support, contact your assigned Xerox Technical Support
for this product.
To Next Page
Loading...
