8-46 Phaser 6130 Color Laser Printer Service Manual
Service Parts Disassembly
6. Remove the screw (silver, tap, 8mm) that attaches the Right Side Pivot
Shaft to the printer.
Note
When performing the next step, keep the Transfer Unit slightly lifted to
ease removal of the Pivot Shaft. If you are performing this procedure
as part of the Transfer Unit removal, the only step remaining after
removing the Right Pivot Shaft is to lift the Transfer Unit out of the
printer.
7. Pull the Pivot Shaft out of the printer.
s6130-118
To Next Page
Loading...
