4-20
FUEL
E
OIL PUMP
REMOVAL AND INSTALLATION CHART
Step Procedure/Part name Q’ty Service points
OIL PUMP REMOVAL Follow the left “Step” for removal.
Engine oil Refer to “OIL TANK”.
1 Clip 1
2 Oil inlet hose 1
3 Clip 1
4 Oil return hose 1
5 Clip 1
6 Plate washer 1
7 Link joint 1
8 Clip 3
9 Oil delivery hose #1 1 250 mm
10 Oil delivery hose #2 1 180 mm
11 Oil delivery hose #3 1 90 mm
12 Bolt 1
13 Bolt 1
14 Oil pump 1
15 O-ring 1
Reverse the removal steps for installation.
NOTE:
Disconnect the joint at the pump side.
NOTE:
When connecting the hose, feed oil into it
while taking care not to allow air to enter.
To Next Page
Loading...
