8. Install:
• O
il
seal clip "1"
TIP
~~~~~~~~~~~~~~
Adjust the oil seal c
li
p so that it fits
in
to the outer
tube's groove.
I
~~
\
9. Install:
• Dust seal "1"
(with the fork seal driver "2
")
1 O.lnstall:
Fork
seal
dri
ver
90890-01442
Adjustable
fork
seal
driver
(3
6-46
mm
)
YM-01442
• Rod puller "1"
• Rod puller attachment (M1
0)
"2"
(onto the damper rod "3")
Rod puller
90890-01437
Universal
damping
rod bleeding
tool
set
YM
-A8703
Rod puller attachment (M10)
90890-01436
Universal
damping
rod bleeding
too
l set
YM-A8703
FRONT FORK
11.Fi
ll
:
• Front
fo
rk leg
(with the speci
fi
ed amount of the recom-
mended fork o
il
)
NOTICE
Recommended
oil
Suspension
oil
01
Quantity (left)
472.0
cm
3
(15.96 US oz, 16.65
Imp.oz)
Quantity
(r
ight
)
458.0
cm
3
(15.48 US oz, 16.15
Imp.oz)
• Be
sure
to
use
the
recommended
fork
oil
.
Other
oils
may have an adverse effect
on
front
fork
performance.
• When disassembling and assembling the
front
fork
leg,
do
not
allow any foreign ma-
terial
to
enter the
front
fork.
12.After filling the front fork leg, slowly stroke the
damper rod "1" up and down (at least ten
tim
es
) to distribute the fork oil.
TIP
~~~~~~~~~~~~~~~
Be su
re
to stroke the damper rod sl
ow
ly be-
cause the fork oil may spurt out.
t
13.Before measuring the fork o
il
level, wait ten
minutes until the oil has set
tl
ed and the air
bubbles have dispersed.
TIP
~~~~~~~~~~~~~~~
Be
su
re
to bleed the front
fo
rk leg of any residual
4-55
To Next Page
