ECA1
679l
NOTICE
~~~~~~~~~~~~
When
disconnecting
a connector,
do
not
pull
the leads. Hold
both
sections
of
the connec-
tor
securely, and then
disconnect
the con-
nector.
2. Check:
• Lead
• Coupl
er
• Connector
Moisture 4
Dry
with an air blower.
Rust/stains 4 Connect and disconnect sev-
eral times.
3. Connect:
• Lead
• Coupler
•C
onnect
or
TIP
~~~~~~~~~~~~~~~
• When connecti
ng
a coupl
er
or connector, push
both sections of the coupler or connector to-
gether
un
til they are connected securely.
BASIC SERVICE INFORMATION
• Make
su
re a
ll
connections a
re
tight.
4. Check:
• Continui
ty
(with
th
e pocket tester)
Pocket tester
90890-03112
Analog pocket tester
YU-03112-C
:
:
TIP
~~~~~~~~~~~~~~~
• If
th
ere is no continuity, clean the terminals.
• When checking the wire harness, perform
steps (1) to (3).
• As a quick remedy, use a contact revitaliz
er
ava
il
able at most part stores.
1-16