Yamaha FZ09E - Page 359

3. Check the entire signaling system's
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-21.
OK t
This circuit is
OK .
The tail/brake light fails
to come on.
1. Check the front brake li ght switch.
Refer to
"C HECKING THE
SWITCHES" on page
8-89.
OK .J,
2. Check the rear brake light swi tc h.
Refer to "CHECKING THE
SWITCHES" on page
8-89.
OK t
3. Check the entire signaling system's
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-21.
OK t
This circuit is
OK .
NG
-t
NG -t
NG-t
NG -t
SIGNALING SYSTEM
Properly conn ec t or repair the signaling
system's wi
ri ng.
Replace the front brake light switch.
Replace the rear brake light switch.
Properly conn
ec t or repair the signaling
system's wi
ri ng.
The tum signal light. tum signal indicator light
or both fa il to blink.
1 . Check the front tum signal/position
li ght bulbs, rear t ur n signal light
bulbs and socket.
Refer to
"C HECKING THE BULBS
AND BULB SOCKETS" on page
8-92.
OK .I.
2. Check the tum signal switch.
Refer to
"C HECKING THE
SWITCHES" on page
8-89.
3. Check the hazard swit ch .
Refer to "CHECKING THE
SWITCHES" on page
8-89.
OK t
4. Check the tum signal/hazard
re lay.
Refer to "CHECKING THE TURN
SIGNAUHAZARD RELAY" on page
8-98.
OK t
NG-t
NG-t
NG -t
NG-t
8-24
~~~~~~~~~~~~~~~
Replace the front turn signal/position light
bulb(s), rear
tur n signal lig ht bulb(s), sock-
et(s)
or both.
Replace the left handlebar switch.
Rep
la ce t he left handlebar switch.
Replace the tum signal/hazard
re lay.