YASKAWA MP3000 Series - Page 259

5.3 Monitoring Machine Operation
5.3.3 Realtime Tracing
5-49
5
Debugging Programs
• Edge ON or Edge OFF
Use these options to sample the data before and after a specified bit changes from OFF to
ON or from ON to OFF.
Edge ON: Edge OFF:










No. Item Description

Edge ON
Use these options to sample the data before and after a specified bit
changes from OFF to ON or from ON to OFF.

Target register (Bit type) Use this box to enter the target register.

Drag this icon to set the trigger position.

% Select the numeric value to set for the trigger position.

ms The maximum measurement time after the trigger is displayed in this box.

Edge OFF
Use this method to sample the data before and after a specified bit
changed status from ON to OFF.