YASKAWA MP3000 Series - Page 258

5.3 Monitoring Machine Operation
5.3.3 Realtime Tracing
5-48
• Trigger Setting Details
These settings specify the conditions for starting the trace. There are four methods to start
the data sampling.
• No Trigger
Use this option to start and stop the sampling manually.

Trigger Setting
These settings specify the method for starting the trace data sampling.
Refer to the following section for details.
Trigger Setting Details (page 5-48)

OK
Click the OK Button to set the sampling and trigger settings, and to
enable the Start Trace Button.

Cancel
Click the Cancel Button to return to the Real-Time Trace Dialog Box with-
out setting the sampling and trigger settings.
Continued from previous page.
No. Item Description