2.3 Connecting Devices
2.3.5 USB Connector Connection
2-50
Removing the USB Memory Device
Use the STOP/SAVE switch to remove USB memory.
After you lightly press and release this switch, the USB memory can be safely removed when
the USB status indicator changes from flashing to not lit.
Note: Press and hold this switch for at least 2 seconds to save all of the data to the USB memory. The display will
show the progress of saving.
Before removing the USB memory device, press the STOP/SAVE switch and wait until the USB
status indicator goes out. If the USB memory device is removed while the USB status indicator is
lit or flashing, the data may become corrupted.
STOP/SAVE switch
Open the cover.
Note
To Next Page
Loading...
