YASKAWA T1000V - Page 433

E.3 User Setting Table
YASKAWA ELECTRIC SIEP C710606 44B YASKAWA AC Drive T1000V Technical Manual 433
Quick Reference Sheet
E
U3-07 7th Most Recent Fault
U3-08 8th Most Recent Fault
U3-09 9th Most Recent Fault
U3-10 10th Most Recent Fault
U3-11
Cumulative Operation Time at Most Recent
Fault
U3-12
Cumulative Operation Time at 2nd Most
Recent Fault
U3-13
Cumulative Operation Time at 3rd Most
Recent Fault
U3-14
Cumulative Operation Time at 4th Most
Recent Fault
U3-15
Cumulative Operation Time at 5th Most
Recent Fault
U3-16
Cumulative Operation Time at 6th Most
Recent Fault
U3-17
Cumulative Operation Time at 7th Most
Recent Fault
U3-18
Cumulative Operation Time at 8th Most
Recent Fault
U3-19
Cumulative Operation Time at 9th Most
Recent Fault
U3-20
Cumulative Operation Time at 10th Most
Recent Fault
U4-01 Cumulative Operation Time
U4-02 Number of Run Commands
U4-03 Cooling Fan Operation Time
U4-04 Cooling Fan Maintenance
U4-05 Capacitor Maintenance
U4-06 Soft Charge Bypass Relay Maintenance
U4-07 IGBT Maintenance
U4-08 Heatsink Temperature
U4-09 LED Check
U4-10 kWh, Lower 4 Digits
U4-11 kWh, Upper 5 Digits
U4-13 Peak Hold Current
U4-14 Peak Hold Output Frequency
U4-16 Motor Overload Estimate (oL1)
U4-18 Frequency Reference Source Selection
U4-19
Frequency Reference from MEMOBUS/
Modbus Comm.
U4-20 Option Frequency Reference
U4-21 Run Command Source Selection
U4-22
MEMOBUS/Modbus Communications
Reference
U4-23 Communication Option Card Reference
U5-01 PID Feedback
U5-02 PID Input
U5-03 PID Output
U5-04 PID Setpoint
U5-05 PID Differential Feedback
U5-06 PID Adjusted Feedback
U6-01 Motor Secondary Current (Iq)
No. Name
User
Setting
U6-02 Motor Excitation Current (ld)
U6-03 ASR Input
U6-04 ASR Output
U6-05 Output Voltage Reference (Vq)
U6-06 Output Voltage Reference (Vd)
U6-07 q-axis ACR Output
U6-08 d-Axis ACR Output
U6-21 Offset Frequency
U6-80 to
U6-99
Option Monitors 1 to 20
U9-01 KEB Start Voltage
U9-02 KEB End Voltage
U9-03 KEB Function Limit Monitor
No. Name
User
Setting